Whew! That’s a long blog title. (And I didn’t even add all the stamp sets!) Maybe you know by now that my preferred style is lots of details and fuss—complication is somehow my specialty. I’ve used all current Stampin’ Up products in my card today, and there are quite a few. Thank you so much for coming to my post! Thumbnails of the products I used will be at the end of post, and clicking them will take you to my online store for more details.
The theme for Stamp with Amy K’s blog hop for this month is “love.” Well, I have a “love” for all things France, so when I was thinking about current Stampin’ Up product I already own that I could create with, of course I turned to the Eiffel Tower. And flowers. I love flowers too. They’re my go-to any time of year. I didn’t have anyone particularly in mind when I created this card; it will likely go to my local gift shop for sale soon. The idea of it came to me while I was driving the other day. The background has changed since, but ideas do that in this craft room. 🙂
I started with an A2 (4.5″ x 5.5″) Thick Whisper White card base and then eyeballed and cut a slightly smaller separate piece of regular Whisper White for a layer on the top. The margin difference is between 1/8″ and 1/16″ because one was too big and the other was too small. I dry-embossed this separate piece with the Subtle 3D Embossing Folder first in one direction, and then I flipped the paper and embossed it in the other direction, which gives it a crosshatched look. I tucked a piece of 1/4″ Petal Pink Metallic-Edge Ribbon around the edges slightly higher than the middle, gluing them on the back side, and then glued my embossed piece down to the card base. (Well, technically, I did a lot of the steps backward, including that part, but do as I say, not as I did!)
The focal part of my card front is the large flower stamp from the Forever Blossoms Cling Stamp Set, surrounded by an embossed die-cut made from the Heirloom Frames Dies and Heirloom Frames 3D Embossing Folders, with the Eiffel Tower stamp from the Parisian Beauty Cling Stamp Set and die-cut flowers from the Cherry Blossoms Dies offset to the side.
I knew I wanted to use Alcohol Blends on the flowers and leaves, but I don’t like coloring large sections with the Blends and making lines, so I felt like watercoloring the background would be best for me. I used the Balmy Blue watercolor pencil in the Assortment 2 pack and an Aqua Painter. (Truthfully, I forgot to color the background until after I’d already distractedly glued the piece to the back of the oval once my flowers were done, so don’t do that. Color it all first; then cut and glue.) Since we can use Memento Tuxedo Black to hold in the colors of the alcohol markers BUT Memento is water-based and will run when touched with water during watercoloring, I decided I’d better heat-emboss some embossing powder on the image after stamping with VersaMark so that I could do both techniques. I’d wanted to try out Stampin’ Up’s new Shimmer White and Shimmer Black Stampin’ Emboss Powders anyway.
I’m actually really impressed with those new embossing powders. I didn’t expect to see the holographic flecks in them, and that feature turns out some neat highlights. The Shimmer White is, of course, white when embossed, but there’s also a mix of silver and holographic flecks that don’t meld together when heated, unlike the white and black colors themselves. And the Shimmer Black includes flecks of silver, magenta, green, blue, and something yellowy that sit subtly on top of the black. The ones in the black are very hard to pick up in the lighting when showing a card, but they’re fun to see. After I heat-embossed the Eiffel Tower with the Shimmer Black, I think my jaw actually fell open—it looked like it was sparkling with diamonds!
When I was working on the oval, I had trouble getting the embossing perfectly centered in the die-cut, and that bothered me—and it also took up more of the card front that way, room I needed—so I trimmed off the excess around the crimped part. It lays flatter now anyway without the extra border edge. Once I had that done, I used it to figure out how I wanted to show my flowers inside it. They are stamped at an angle. I actually had a different angle chosen, but I didn’t glue it in the same way I had set it, so watch that if you do it. Mark a place at the top so you don’t twist it too far to the side. I cut a small section of Shimmery White Cardstock for the flowered piece, which you can see some of in the blue background in closeups. This card is quite shimmery everywhere you look!
To color the flowers, I used my Dark Petal Pink, Light Granny Apple Green, and Dark Granny Apple Green Alcohol Blends, as well as the Color Lifter. I tried to work with the Ivory too, but I had to lift the color right out of it because it felt too dark on the buds I colored. (I used to have a Light Petal Pink Blend and wanted to use it, but at the last show where I was a vendor, the cap didn’t get put back on correctly and I didn’t catch it until it had already dried out. So I have to order a new one.) When I colored the flowers, I went over the centers and extended the color some with the Dark Petal Pink first, then lightly went over everything with the same marker, and then took the Color Lifter to the outside edges of the flowers or buds. I would have also liked to have left some white on the flowers to look more like the DSP in the Parisian Blossoms Specialty Designer Series Paper, but it just didn’t work out that way. The embossing on the flowers and leaves is really where all the shading and shadowing is, so it felt more like reverse coloring as I worked with it. There’s not a lot of space in the flowers that isn’t embossed. I did color right over the embossing, and it does not rub off (though I did not intentionally test that when it was wet).
The Parisian Beauty stamp set is one I won with my Prize Patrol number at November’s OnStage conference, and I hadn’t ordered the matching Parisian Dies yet because I already have a Bigz Eiffel Tower die and several stamp sets having to do with France. In my mind, I saw the SU die-cut at the side of the card and thought I had bought the set until I went looking and remembered. Stampin’ Up’s die-cut is much prettier than the other die I have, so I will be ordering the Parisian Dies after all. For today’s card, though, I had to fussy-cut the stamped/embossed image.
I used the Cherry Blossom dies for the flowers on top of the Eiffel Tower. The stamens and star center were cut out of Champagne Foil and the flowers themselves out of Petal Pink cardstock. I actually doubled the littlest blossom, sandwiching the foil in between to make sure it stayed where it was supposed to. I wanted the blossoms to curl up a bit and had to use the tip of my Tombow Mono Liquid Glue to get the curves I imagined, instead of my large ball tool that was “somewhere.” The dies emboss curving lines in the flowers when cut, as well.
I popped up the Eiffel Tower with Mini Dimensionals to help the height of the knot at the edge of the card, so some of the cherry blossoms on top of it are glued flat and some have been half glued flat and half popped up. The littlest blossom actually has two half Mini Dimensionals at the right and is glued on top of the others otherwise. I knotted a small bow with the 1/4″ Petal Pink Metallic-Edge Ribbon (the last of my sample from OnStage!) and used glue dots under it, on top of the ribbon that was wrapped around to the back, to keep it in place.
To finish the card front, I used the “Always thinking of you” sentiment from the Very Versailles Cling stamp set and stamped it in Jet Black Staz-On ink on a scrap of Thick Whisper White cardstock (with no embossing either way). The Staz-On ink seems darker than the Tuxedo Black Memento ink, and since I had such a dark Eiffel Tower, I didn’t want to go halfway on my ink. To my surprise and delight, my Simply Shammy removed the Staz-On ink from my stamp with just a little scrubbing. Now I don’t have to drag out the pungent Staz-On Cleaner and do the whole paper towel mess! Hooray!
I also used my new Paper Trimmer and even the new Mini Cutter to trim up the sentiment scrap and the first version of my Subtle-embossed piece. The Mini Cutter is only available to demonstrators and those who become demonstrators during Sale-a-Bration, so if you want one, you’ll need to sign up to get it and some other goodies (but I promise it’s worth it!).
The inside of the card is hiding an oops, but I got a lot more creative with what you see versus what I had, so I’m happy about that mistake. I used the largest of the Painted Labels Dies to cut my “label” for the sentiment out of Sahara Sand cardstock. I stamped the “Sending All My Love” sentiment from the Last a Lifetime Cling Stamp Set in Jet Black Staz-On, using my Stamparatus. And then I glued more Champagne Foil to three more blossoms of various sizes (star centers and stamens, both) to two corners of the label. I did not curve those blossoms. 🙂
All in all, I’m pretty happy with this card. I hope you like it too. Please leave me a comment and let me know what you think or what you would have done differently—or any questions you may have. Just for fun, I’ve included a picture of the “clean and simple” version of this card to show you what it would look like without the flowers. Somehow it’s a very different feel! Nothing was glued down yet when I took the photo.
We have a very talented team creating for you today, so please “hop” around to the others on this list to see what they made! If you hit the “Previous” button, you’ll go back to Mary Deatherage’s blog, or you can go “Next” to Akiko Sudano’s offering. Both women create amazing cards! Or you can skip around with the links below—you’ll find many you like. 🙂
- Karen Ksenzakovic – https://wp.me/paaNf4-1uG
- Shirley Gentry – https://stampinwithshirleyg.com/?p=10221
- Mary Deatherage – https://wp.me/p5snyt-aZ2
- Connie Troyer – You are here!
- Akiko Sudano – https://wp.me/paOv8E-KT
- Jaimie Babarczy – https://wp.me/p79UhD-3wt
- Karen Finkle – https://karenscardkorner.blogspot.com/2020/01/stampin-up-parisian-beauty-for-amys.html
- Sue Prather – https://wp.me/p5yitZ-1I8
- Leslie Larkin – https://leslielarkin.com/heart-to-heart-bundle-for-amys-inkin-krew-team-blog-hop/
- Amy Koenders – https://wp.me/p2SFwf-idu
And if you are interested in the products I used on this card, I’ve added them to the next list, and the thumbnails are direct links to my online store for more information or purchasing.
If you wish to purchase something from my online store, please use the host code WAA2PGYR during checkout. Orders of $50 before tax and shipping also gets you a free gift of your choice worth up to $8, from me to you as my thanks. 🙂 (You’ll also get a free Sale-a-Bration item from Stampin’ Up with every order of $50 before tax and shipping!) If you’re interested in becoming a demonstrator and want to sign up with a great time, I’d love to have you join mine—and Sale-a-Bration is the best time to do it! Recruits who join before March 31, 2020, will receive the brand-new (only available here) Mini Cutter (which is a guillotine-style trimmer), a 6″x6″ sampler pack of Designer Series Paper (48 sheets of most of the DSP from the Mini catalog), a free stamp set of their choice, $125 worth of items for $99, and more. I’ve never regretted it!
Thank you again for stopping by to see what I created today!
21 thoughts on “Flowery Eiffel Tower Love Card with Stampin’ Up’s Forever Blossoms, Parisian Beauty, and Last a Lifetime for Stamp with Amy K’s Tuesday Blog Hop”
Oh my – that Shimmery Black on the Eiffel Tower is really spectacular!! Super design choice!! 🙂
Thank you! I was seriously impressed. I wish it showed up better in photos. You’ll have to try it. Right now it looks like it’s covered in Christmas lights. 🙂
Oh my goodness, how pretty! Love the framing around your flower images, the Eiffel Tower die cut is perfect with your design! 🙂
Thank you so much, Amy! I figured you’d prefer my “clean and simple” version. 😉 This was my first time using any of the main products besides the Subtle folder, and I’m really pleased with how they all work! Money well spent. 🙂 Thanks for including me in the hop!
I love your very detailed instructions and your very frank advice about don’t do as I did, do as I say!
😀 Thanks for saying so! My mistakes might as well help someone else! 🙂
Absolutely beautiful Connie 🙂 Love your flowers and the touch of sparkle on them and the Eiffel Tower.
Thank you so much, Karen! Glad you like it! ❤
Lovely card. Looks like a LOT of work to me, so I probably won’t be CASEing this one. I haven’t tried the new embossing powders…I really think I need them now after seeing your Eiffel Tower!
You should try them, Julie! I think you’ll like them. The white would be perfect for Christmas and angels, especially, but they would both have many uses. 🙂 The card wasn’t as complicated as it looks, I promise! There would be ways to make it easier, like if you did alcohol blends on all of it instead of embossing, or embossing on only one or the other. There are four large blossoms and two sets of smaller ones, so if you do them all at once, it goes quickly. 😉
Very pretty card! I love all the details, sparkles and glitter.
Thank you so much! ❤
Thank you, Leslie! So glad you like it!
Wow this is beautiful!! Love how you added the shimmer to the flowers and tower. Lots of great texture and layers.
Thank you so much, Jaimie! I finally feel like I got back to my usual with this one. Too many clean and simple cards lately! Lol!
Connie, I always enjoy reading your post, I think I’ve told you that before. They are always so detailed. Your card is beautiful with all the sparkle. You did put a lot of work into it.🙂
I’m always happy to hear your thoughts, Shirley. I’m glad I continue to please you with my posts–and my cards! 🙂 ❤ Sometimes I think most of the work comes with the blogging! 😉