Well, my first foray into using Stampin’ Up’s Embossing Paste was certainly interesting. It’s been sitting on my desk patiently waiting for me to get to it. I finally got the paint palette and palette knives, and I already had ink refills to tint it with, should the mood strike. This won’t be too hard, right? I thought. Hmm.
Tonight the mood struck, when I was permitting myself a little dabble time before attempting to go to bed at a reasonable hour (since I’m on book deadline again). I had a salt-and-pepper love-themed notecard I wanted to add some hearts to as a border, and I thought the thick embossing paste would show up better rather than ink of the same color on a stamp I was waffling on.
Well. Apparently I have to figure out how not to let it bleed underneath the stencil. That seems to be my main problem. I had washi-taped down the edges of the first stencil (and card), which was created from an edge punch, and even kept my hands on all of it as secondary security, but still I erred. The heart borders weren’t terrible, though I don’t like the smudges at the bottom. I think I went over them three times. And once the paper is smudged with the color, it’s definitely hard to remove it.
I forgot to mention that I had put a little bit (probably too much) with my palette knife into my paint palette and added a drop – and then two drops – of Sweet Sugarplum ink refill (SU, current product, In-Color). I’m going to guess that one drop is enough. I was trying to match the color of the SU heart enamel shapes because I already had one on the card. Two drops definitely made it darker. So then I thought maybe I should add more paste to spread out the color more and make it the lighter shade I was going for. That meant there was a whole lot of embossing paste in my palette tray, more than six hearts would require. And mixing all that with my metal paint palette was difficult and sounded like scratches on a chalkboard. Perhaps a foam board or toothpick next time.
I started looking for other stencils I could use while I had all this goop I didn’t want to waste. I found a DCWV 6×6 stencil (EM-033-00012) that had both “LOVE” and “Be You” on it, and since this is the season for Valentine’s Day cards, I thought they’d go nicely with my current projects. I pulled two heart stencils too. Ambitious, apparently. 😉 And no, my paste didn’t stretch that far. 🙂
But in doing the “Be You” stencils on cardstock and then on DSP, I had a lot more problems with runs beneath the stencil. Granted, things were starting to dry while I searched for more stencils to use up the excess I’d made, but I thought I had time. Maybe I should have added a drop of water to keep it thin? No idea. Will have to research that.
I did find that once the paste was partially dry, I could take a tool and scrape off the excess around the letters…and the piece of black background/polka-dotted paper hid that a little better than the grey cardstock. Still not perfect, though. But manageable. At this point I’m thinking of taking my Cutterbee scissors and fussy-cutting around the gray cardstock example. Seems like it’s drying pretty quickly. I can’t scrape off anything around the hearts anymore. It would let me pat the “Be You” letters back into place by hand when I was trimming those with my Creative Memories sticker placement tool (use whatever you’ve got, right?).
Then I tried to wash off my tools. I think I should have done that immediately. I stood at the sink scraping off the stencil (which had been used twice then) with my fingernail, under running water and even soaking it in the sink. I couldn’t get it all off, and I bent a bit of my stencil as well.
So, I’m looking for tips on just what to do or not do with stencils and embossing paste. I’ve figured out that a little ink goes a long way and the paste dries fairly quickly, and obviously I need to clean the stencil earlier – but how do I get it to stop the bleeding? Thinner, repeated layers? I like height. 😦 I couldn’t see how to washi the close parts down either. If you have advice, I’m all eyes. Thanks in advance. It has to get better than this! It leaves such a cool 3D look when it’s actually all smooth.
I’ve wondered, too, whether the embossing paste (tinted or not) would work in silicone molds like SU’s retired pressed clay molds or the current Mod Podge molds sold in various locations. Any clue?
Pics attached so you can see my mess. 🙂 And thanks for the help! I feel like such a newbie. 🙂
Playing along with a Stamps, Ink, Paper Challenge (128) with a Snowy Polar Bear Christmas card and matching thank-you note.
Here’s another adorable card with matching thank-you note that I created for a custom card order needing to be mailed soon. I think it fits the Stamp Ink Paper 128 challenge, shown below:
So here are my matching cards.
I’ll tackle the main Christmas card first. The embossed snowy background was given to me by a crafty friend, and I flipped it over so that the debossed side was showing. I matted it with some current SU Emerald Envy plain cardstock on a Thick Whisper White card base. The paper-pieced polar bears and trees are 3D stickers from a “Holiday Time” series – I think they might be from Walmart. They’re actually pretty cool, using poms for the tails and the ends of scarves, and the tree is glittered.
I was having trouble fitting all three on the A2 card base, so I thought if I had one peeking over a snowbank as if he were watching the scene, I could put them a little closer together. My “snowbank” is made out of two strips of shimmery translucent vellum paper, which I cut by tracing a Card Creator Spellbinders die and then cutting it out by hand (hubby was sleeping and I was trying to minimize the noise, plus I wasn’t exactly sure where I wanted the mounds to go, so I traced/cut it especially long and then positioned them where I wanted them). I popped up the vellum in parts for effect and to fit the back polar bear in without squishing him (trying to reduce that whole “translucent” thing).
I had thought of using white handmade mulberry paper instead of vellum, but I didn’t feel like making a bunch of noise and rooting around in my “specialty paper” drawer since it was late and I was only supposed to be “fiddling” (i.e., going to bed soon) as opposed to outright intentionally creating.
The “Happy Holidays” sentiment above the scene is from a 2016 Hampton Art stamp and die set (SC0718). It bugs me a little that the font sizes of the two words is not the same, but as the set is either photopolymer or acrylic (read: see-through), it was easier to line up than others. I inked the stamps with Stampin’ Up’s Emerald Envy ink overtop a strip of polka-dotted paper from American Crafts/Dear Lizzy “5th and Frolic.”
I kept the inside of the main card simple with a “Warm Wishes This Holiday Season” sentiment from Close to My Heart’s “Scandinavian Wishes Stamp of the Month,” (SU Emerald Envy ink), punched it out with my retired SU Scallop Oval punch, and matted it with my SU Decorative Label punch in Emerald Envy cardstock.
The thank-you note, on the other hand, is simply a SU Whisper White notecard size (3.5×4 7/8) with a background of gold snowflakes on vellum from SU’s “Winter Wonderland” Designer Vellum Stack. I laid an Emerald Envy cardstock piece embossed with the “Thanks Words” Cuttlebug folder (371134) on top (putting the glue for the vellum underneath where the cardstock layer would hide the adhesive) and then cut another “snowbank” out of the gold snowflakes before finally adding the last sticker in the Holiday Time set. (Yay, another thing used up in my stash! I really am trying, hubby dear.)
These cards were ones that were simple, thought-provoking, and yet fun to create – my favorite kind. It was my first time trying to create “snowbanks” even though I’ve seen them used with regularity this season. And I’m fairly pleased with how it all turned out. Unfortunately, they’re another two cards I can’t duplicate unless I find another pack of stickers (thus then adding to my stash). 🙂
Hope you’ve enjoyed this offering! Thanks for stopping in.
A musical birthday card for a musician celebrating a milestone year.
I took a break from Christmas cards to do up a few birthday cards that I needed to deliver or mail. One of them went to my aunt, who is a supremely talented pianist. I had thought of using this focal image for her ever since I first got my hands on this cute House Mouse stamp.
I grabbed a premade base that was of a larger size, since the stamp itself is basically the size of an A2 card front. No room for the music note paper I wanted to use behind it. But this larger card size worked well for the idea.
First I put down a layer of silver foil cardstock (cutting out the inner portion with snowflake and winter-themed word dies that I can use on other projects). The music paper I placed on top is from Echo Park’s “Be Mine” line. I then stamped, colored, and cut the House Mouse image so I would know what size to cut the Silver Glimmer Paper (glittered cardstock) from Stampin’ Up, which I placed behind the image as a mat.
I think I might need to work on my coloring skills, or at the very least shading, but I’m pleased enough with my creation. 🙂 I used three sets of watercolor pencils, an AquaPainter, and Ranger’s Jet Black Archival Ink to stamp and color the image. I topped it off with some gold Smooch Paint for the knobs on the violin and the lettering of “Mauschen,” the name of the piano. I had looked up the stamp online and found the colored image from House Mouse, so I tried to imitate those color choices. (Each of the mice are named and has their own coloring specifications.) I think next time I might try a black piano, however.
I had the most trouble finding and placing a sentiment on the card due to limitations in space and supplies. I had to revise my initial idea several times, and the more I hurried to finish it (since I needed to be leaving the house), the worse it got. Isn’t that always the way of it? Eventually something worked, although I realized an hour later that I’d forgotten to include the milestone number she was turning, as I’d intended. But maybe she doesn’t need that advertised. 😉
So, the tag is from the American Crafts “Everyday” line, the “Just a Note” sentiment is from Rubber Cottage, and I couldn’t read my handwriting on the back of the tiny music notes I added to the tag, so I can’t say who made that. The black lace ribbon is from Stampin’ Up. I stamped the sentiment with Jet Black Staz-On ink because the tag was chipboard with a shiny top and water-based dye inks just wipe right off of those. I used my heat gun to speed up the drying process as well.
The inside of the card finished the thought begun on the front (“Just a Note”) with “Wishing You Happy Birthday.” Again not quite what I’d intended to say, but time really was of the essence, so I made do with the first couple things I found rather than creating a custom sentiment. And I’m the only one who overthinks these things, so it probably doesn’t matter. 🙂 The stamp sets I used for the inside are from Stampin’ Up (“Wrapped in Warmth”) and Close to My Heart (“Gracious Greetings”). I also embossed piano keys for the bottom border. The embossing folder I used is 5×7 and entitled “Keyboard,” from Cuttlebug.
Coloring always takes a bit of time, and I really do need to perfect some shading skills (here’s wishing I could go back to art class), but I’m generally pleased with the images once I’m done. I always enjoy seeing how the lines swirl and blend together when I’m watercoloring. Perhaps I’m really a Renoir at heart. 😉
That’s all for this birthday card. The others I created were simpler, of course. But details are my specialty. 🙂 Thanks for reading!
Hello, all! It’s November now, but all I’ve been hearing for hours is rain. Still, there are Christmas cards to create. I have a couple of custom orders for them along with my own this year. This card, I’ll use for one of the orders.
I feel like I made it out of practically nothing. Or, rather, it cost me practically nothing to do it, by the time I divide out all the pieces in the packs, etc. The card base from Die Cuts with a View was bought several years ago on clearance, and with this card I finally used up the pack (sad face here, as I loved them and have been hoarding them). It has a scalloped edge on the front of the card with two lines of glitter above the scallops and dots of glitter inside each curve.
I have mentioned that crafters are a generous bunch. Both the embossed snowflake background and the die-cut snowman came free of charge from such generous crafters in one or two of my Facebook groups. (And the good news is that I still have a few more embossed backgrounds, though I am sadly out of snowmen.) I may have traded some of my own supplies for them, or perhaps they came as Happy Mail or a RAK (Random Act of Kindness). Either way, I’m happy to make use of them. Though I have no idea which companies to thank. The snowman looked as though he was exceedingly happy and welcoming something, so I figured he would like a snowfall. 🙂
I sized up the snowflake background to the card base and realized I’d have to cut it down a bit to keep it above the glitter lines. I backed the embossed piece with some textured purple/mauve Gauze Paper from DCWV. The snowman got a little color enhancement with some Stampin’ Up inks and a Blender Pen. I tried to give him a sort of muted vintage look to coordinate with the other colors. (And I wasn’t sure if he was stamped with archival ink that doesn’t bleed when touched with waterlike substances, so I had to color him carefully just in case it was a dye-based ink.)
I had a few sentiments that would fit the upper corner, but I had trouble deciding on one until my tiredness and the hour made the decision for me. (“Slap it down and move on,” my friend A likes to tell me. I actually listened this time.) I found this “Season’s Greetings” in a pack of rub-ons from American Crafts, so I put it on a scrap of vellum hanging out on my desk, punched it out with Stampin’ Up’s retired Word Window punch, ran it through my Xyron Sticker Maker, and then needed a way to make it show up, since vellum is see-through. Enter a remnant of gauze paper, which I’d cut out of the center of the mat for the embossed snowflake background. (Why waste perfectly good material and hide it where no one will ever see? Craft supplies aren’t cheap!) I used a Spellbinders Die to cut the simple border, which fit the vellum rub-on sentiment perfectly. And this way we got to see a little more texture of that cool paper, since the mat behind the snowflakes is small by necessity.
To echo the glitter that came on the card base, once I knew how much room I had to play with at the sides around the front piece, I stamped a border (bought from Oriental Trading) in VersaMark, poured on some retired Iridescent Ice glitter embossing powder from Stampin’ Up, and heat set it, one on each side.
I kept the inside of the card simple with a “Let It Snow” stamp from SU’s “Snow Place” stamp set and a couple of snowflakes from SU’s retired “Letterpress Winter” set. I used Pale Plum ink (also SU, retired) and more of the retired Iridescent Ice glittered embossing powder.
Fairly simple card overall, though some of the pieces took a bit of fiddling. I enjoyed this one and may try to make more of them with different snowmen and sentiments. Thanks for stopping by and reading!
It’s time to start making Christmas cards! Okay, it’s probably past time, and I’ve been creating them for a couple of weeks, but here’s my first blog post about one.
The other day, hubs and I figured out a new way to keep each other company while I remained productive with crafting. The result was the outside of four winter/Christmas cards finished. They’re pretty simple, but simple can be elegant sometimes. Our wedding, for example. (Or at least that’s what I was trying for back then.)
Pardon the mess behind my desk, but this is the only shot of the four together so far.
I have two custom Christmas card orders right now along with the niggle of something bigger in the works (we’ll see if it goes anywhere), so I figured all four would go one place or the other, or I could split them up.
I used all Stampin’ Up materials for these except for the bling – Whisper White cardstock, the retired Northern Flurry embossing folder, paper strips cut into banners from one of their retired 6×6 Christmas paper packs (I didn’t write down which one), Soft Suede and Early Espresso inks with matching cardstock, and the “Wishing you a season filled with warmth and cheer” sentiment from the set “Wrapped in Warmth.” The rhinestone bling is from Michael’s, SU, and CTMH.
I’m still stamping the insides of three of them. So far I have “Merry Christmas to You and Yours” (from SU’s “To You and Yours Too” set) on the inside of the Soft Suede version, shown below.
I love how the embossing just pops off the card. I had originally wanted the snowflakes to come cascading from the upper-left corner but realized after I cut the cardstock that that wasn’t going to be possible because of the direction I’d cut it. And I had thought to only have a smaller 1/4″ strip extending from top to bottom but didn’t like how that interrupted the little snowflake down there…so after some brainstorming with hubby, since he was in the room, this is what we decided looked best. And I’m pleased with it. I think it like it better than my original idea. (Not that I won’t try that original idea again some year. 🙂 )
Thanks for reading! If I can make Christmas cards for you sometime, send me a note or visit thelittlewhatnotshop.etsy.com. 🙂
A simple (and overdue) thank-you card using American Crafts, Glitz, and Stampin’ Up products.
Sometimes life gets ahead of me and I get behind on doing the seemingly easy, necessary things in life. One thing I’m really bad about is sending thank-you cards.
It’s not that I’m not grateful or that I don’t think of the sender every time I see or use their gift…I just fail to tell them how much it means to me. I often feel at a loss for words or inadequate when trying to compose all the feels onto a tiny 5-inch card. I could blame my parents (though I won’t), as I never had to write thank-you notes for gifts received. (Maybe because of that, receiving them just isn’t that important to me personally. As long as I know they got my gift, I’m good.) I’ve finally conceded that I’m wholly out of practice and singularly bad at composing them – and 100 percent a procrastinator. I’d rather the words magically flew onto the card and into the mailbox without my fumbling assistance, while I hope they pass muster. Not to mention that writing them out now kills my fibromyalgic hands. A card and a half, give or take a half, and I’m done in with hand cramps. I love the gift; I love the sender; I hate the card that follows.
Well, like other things in life, thank-you notes are apparently necessary and extremely important to (hmm, how do I say this?)…to people who aren’t me. For this particular thank-you note, I’m about two months behind. I’ve known what front piece I was going to use for at least that long, but it was a matter of finding or taking the time to do up a card. (Now that I’m a cardmaker, I feel REALLY funny about sending a store-bought card even if I’m short on time or behind on putting one in the mail, as if I’m secretly saying that I don’t care near enough about them to take the time to handmake a card. Therefore the calendar stretches out before I get the required cards made. Sigh.)
I’ve been having a pretty busy year. I’ve flown a handful of times, once out of the country, been to board meetings twice, made a half-country trek by car once and not-as-long other car trips at least twice, said goodbye to a dear uncle, crammed in editing projects, and continued to take and finish custom card orders through it all. It’s starting to feel as if I can’t stay home long enough to get ahead on anything. Enter the now-very-behind thank-you note, which I had to make and send for the reasons above. I’m just about out of brain cells at this point.
I knew how I wanted to make the card once upon a time. I laid it all out in a heap on my desk, to signify to myself that THIS was how it was going to go. And somewhere along the line other projects joined it and other work also had to get done, and the long and short of it is that by the time I finally had to shake myself out of the procrastination coma and send the blooming thing, I had only a semblance of an idea of what I was supposed to be doing with it. Plus I couldn’t find the burlap piece. Hubs decided to join me in the craft room that night, and we watched a movie on my not-so-used TV while I fiddled with the card, trying to come up with some new design.
The card is pretty simple, or at least it looks it. I grabbed a leftover base from my stash of unused Basic Gray baby-invitation bases, hoping I won’t regret that decision when I work on her baby album next year; I liked how the darkness of the outline of the flowered piece matched. And then I just rearranged card pieces in front of me until something made sense. I think I actually meant to do something else with it, but the sizing on the striped paper was perfect as it was and rather distracted me, so I ended up completely forgetting that I meant to go the other direction. I tried a number of compilations, but in the end, this is what made sense to my boxy self.
The striped paper is from Stampin’ Up. I needed to have some sort of color separation and size difference between the flowered piece (which is from American Crafts, 320490) and the stripes, so I ended up using a yellow remnant from Glitz Design that mostly matches the yellow in the flowers. I had a better color match but didn’t like the pattern or size nearly as well. I added “bling” in the form of something akin to Stampin’ Up’s Candy Dots; these yellow and green dots are from SU’s “Little Moments” Project Life Accessory Pack. It always amazes me how colors across completely different designers can still match. Or maybe it’s more amazing that I actually manage to pull them all together on a card.
At this point I decided the card was too simple or plain. I have this fight regularly with myself. One side of my brain says it’s fine/nice/great/perfect the way it is and shouts at me to leave it alone, and the other side of my brain hesitates and weighs things and just isn’t convinced, thinking it’s not quite right yet – more tinkering needs to be done. The latter won that day. I have a bottle here of SU’s Dazzling Details glitter glue in an iridescent whitish color, and I’m not sure I’ve ever used it much. This became evident when the glitter glue came out in nonspreadable clumps instead of a smooth flow. I did my best at smooshing them out onto the flower centers while I mumbled that I should throw the bottle away, but I persisted. It was better than trying to find a similar color in my Stickles from Ranger.
I finished the centers, leaned back in my chair, put my feet up, and watched some more of the movie before going on to create the inside of the card. And right after I flipped open the card and got glitter on my fingers, I remembered that the glitter glue on the flowers would still be wet. (I like to take an entire day to dry them, if I can.) So I muttered some more, closed the card, got out the bottle of glitter glue from where I’d put it away, and proceeded to redo the flower centers.
Eventually the inside did get finished. I’m just now realizing that I forgot to take a picture of it – the urge to mail the card was finally the foremost thing in my mind, apparently – but it was just a white piece to write on and a couple of leftover strips of paper as bottom borders. And, as usual, I didn’t have enough room to write all the heartfelt thoughts battling in my head for the 5-inch piece of paper. Sigh. At least this one is finally done and gone. I’m relieved that I no longer have to remember to do it. Until next time, that is.
…I really need to get better at this thank-you-note thing. Too bad practice comes with writing them. 😛