“Celebrate Summer” with Peaceful Place for Stamp with Amy K’s Blog Hop

Hello again to my readers! Thanks for joining me today. I haven’t been able to post much lately—summer being a busy time and all!—but I just got back from celebrating a long July 4th weekend with family and joined Stamp with Amy K’s July 9 blog hop to “celebrate summer.”

Summer is one of my favorite times of the year. I love being outside without a jacket, I physically feel better and am rarely cold (unless I’m indoors with air-conditioning), activities abound, flowers bloom, and my birthday falls during the summer—so how can I not love it? The sun alone just makes me smile. So this card features a stamp set called “Peaceful Place” because one of my favorite things about the summertime is being outdoors with nature, where the breeze blows and the birds sing and I feel happy all over. (And perhaps a little sweaty…which is way better than being cold.)

I was recently asked to make a card for someone who is going through a hard time. Even though I’m celebrating summer, it seems like she is going through more of a “winter” time in life right now. So I was hoping I could create a quiet, peaceful, “run away” kind of feeling in my scene that would help her psyche and help bring her peace and encouragement with a card from her friend.

Stampin’ Up has several kinds of coloring tools available. I began my card by using watercolor paper and stamping the main “Peaceful Place” image on it in the retired Basic Gray archival ink so that I could watercolor with my colored pencils and Aqua Painters. I wanted a lighter “no-line” sort of look, so I used Basic Gray rather than Basic Black. (You can see the complete list of current items I used below the list of blog participants.) The “Peaceful Place” stamp set is available in both Clear-Mount and Wood Mount. I have not used the current Fluid 100 Watercolor Paper in my card today, but I’m looking forward to getting some and testing it out. I’ll let you know how I like it!

After I had stamped out two of the images, I set about coloring them with my watercolor pencils while I ate lunch. 🙂 When I have time, I stamp two images so that I can play with the colors and figure out what I like best. I almost always go with my second try. I have so much to learn about color mixing and shading yet. When I was happy with the color I’d put down, I carefully brushed over each color individually, wiping off my AquaPainter when I was done with one so that I didn’t transfer any ink. Then I set the paper aside to let it dry.

To build the card, I started with a kraft card base from the Magnolia Lane Large Specialty Memories and More Cards and Envelopes pack. I found a large background card I liked out of the Magnolia Lane Memories and More Card Pack (it had a lovely open space for a sentiment in the middle, which I had to unfortunately cover up). Fun fact: the repeated green pattern looks like the stamp from the Verdant Garden Photopolymer set, so these products would coordinate beautifully!

Verdant Garden Photopolymer Stamp Set

I needed a divider of some sort to finish hiding the sentiment spot in the background paper, and the Seaside Spray gingham pattern from the 2019-2021 In-Color 6×6 DSP pack fit the best. I feel as if it kind of fades away and leads into the background the way a soft vellum would (I tried vellum but the color was all wrong.) Then I adhered my dry watercolored “canvas” on top of the patterned papers.

I love that this stamp can not only be used for “thinking of you” cards like this but also sympathy and masculine and fall subjects. It’s just so versatile!

I wrapped a length of Whisper White 5/8″ Flax Ribbon around the back of where the gingham paper ended and decided to place my own chosen sentiment atop it. I first die-cut a piece of Gray Granite cardstock with one of the dies in the Stitched Labels Framelits Dies and then placed a sticker sentiment reading “Days Like These…” on top. It matched the greens and die-cut tag perfectly in both color and size. The sticker sentiment is also from the Magnolia Lane Memories and More Card Pack. I figured it was applicable, with all this lady has been going through. And it fit with the inside sentiment stamp I’d already discussed with my customer (which is not made by Stampin’ Up).

Running down the sides of the inside paper are two more stickers from the Magnolia Lane Memories and More Card Pack, which set off the inside sentiment just right. I stamped the sentiment stamp in Gray Granite ink as well. Then I colored the heart with my retired Pink Pirouette alcohol Stampin’ Blends marker—the best light heart color I had to work with.

I guess it turned out to be a very simple card after all—simple enough to be on the way to its recipient soon. I hope it makes her smile.

As a reminder, you can see the current products I used below the list of blog participants. Clicking on the links will take you right to my online store if you want to purchase any of them. Thanks for reading about my crafting journey! Be sure to “hop” around and see the other projects my incredible teammates have created to celebrate summer! Click the “previous” button to go back and view Paula Vincent’s blog or click “next” to jump forward and visit Leslie Larkin’s!

  1. Karen Ksenzakovic: https://wp.me/paaNf4-JK
  2. Jaimie Babarczy: https://wp.me/p79UhD-2Wn
  3. Sue Prather: https://wp.me/p5yitZ-1kz
  4. Paula Vincent: http://cockeyedcrafter.com/2019/07/09/celebrating-summer-sunsets
  5. Connie Troyer: https://constantlycreatingme.wordpress.com/?p=1513&preview=true
  6. Leslie Larkin: https://leslielarkin.com/come-sail-away-suite/
  7. Karen Finkle: https://karenscardkorner.blogspot.com/2019/07/stampin-up-sailing-home-birthday-card_9.html
  8. Shirley Gentry: https://stampinwithshirleyg.com/?p=6260
  9. Julie Johnston: https://wp.me/p8SzmQ-2eD
  10. Mary Deatherage: https://wp.me/p5snyt-8yk
  11. Akiko Sudano: https://wp.me/paOv8E-dD
  12. Amy Koenders: https://wp.me/p2SFwf-g8V

These are the products I used to create today’s card.
Product List

You’re So Cool Card

This fun summertime card uses some retired Stampin’ Up DSP—Tasty Treats and Cupcakes & Carousels—along with an unnamed stamp set featuring puns (I used the sentiment and the small popsicle here), and I even incorporated a large popsicle from an adult coloring book. I colored the small popsicle with Stampin’ Blends alcohol markers (Balmy Blue, Light Calypso Coral, and Light BlackBerry Bliss) and I used Tuxedo Black Memento Ink for the sentiment and small popsicle. The Decorative Label Punch was used around the sentiment (which I then inked the edges of with a Crumb Cake Stampin’ Write Marker).

www.facebook.com/339078276585787/posts/617132958780316

Happy Birthday, Magnolia Lane

Happy Birthday, Magnolia Lane—two quick cards using the Magnolia Lane Memories and More Card Pack from Stampin’ Up.

Hello again! It’s time for another Stamp with Amy K Blog Hop! Our focus is on birthday cards this time. I’ve had some busy, busy weeks here. Hope yours has been quieter. It’s time for another handmade-card delivery to my local gift shop, so I took a few hours last weekend to churn through some cards and prepare them. Stampin’ Up’s gorgeous Magnolia Lane Memories and More Card Pack and the complementing Magnolia Lane Large Specialty Memories and More Cards and Envelope Pack made it very easy to have two cards done in record time.

I was really just looking through the Magnolia Lane card pack to see what there was to work with, and, as often happens to me, I began “seeing” cards in my head as different combinations of pieces flashed in front of my eyes. So even though I had intended to only create one card, I liked the final front combination and the 3×4 card I used on the inside so well that I decided my mom needed a birthday card too, no matter how long I had to wait to give it to her. 🙂

The cards in the Magnolia Lane card pack are just so pretty, and there are quite a few with sentiments on them. The “Happy Birthday” one is elegant and classy in its design and font without being over-the-top. Although I could have die-cut the sentiment out of the card, I liked it just the way it was (which was faster anyway).

After choosing a large striped “Project Life”-style card for the background and two flowery smaller background ones to match the “Happy Birthday” card, I then adhered the leafy envelope liner into the kraft envelope and creased the flap. Then I glued the background card I’d chosen onto one of the kraft card bases from the Large Cards and Envelope pack.

My first card, shown in the clear jacket it will be sold with.

I played around with the placement of the Petal Pink 5/8″ Striped Organdy ribbon on the coordinating 3×4 “background” card, decided where I wanted it, and put adhesive on the back before wrapping the length there tightly, since the ribbon would show the adhesive through it. Then I just staggered the two smaller cards on top of the larger striped card and glued them.

My second card.

I accented the top and bottom of the ribbon with the Frosted Flower Embellishments and then added gold Metallic Pearls in the little divots of the flowers. And then the corners of the sentiment piece looked just a bit bare to me, so I added the pearls there too. 😁

On the inside, I used the “You Are Loved” 3×4 card, some white paper for a message, and a few of the stickers from the sticker sheets included in the Memories and More pack. Easy-peasy!

The inside of both cards (this one is shown inside a protective jacket).

Thanks for stopping by to see my creations. These are great products not only for scrapbooking but for cardmaking too. With everything matching, creating is a breeze! To see what the rest of my teammates have made this month, you can follow the list or “Previous” and “Next” buttons to “hop” from one blog to the next.

inkin-krew-blog-hop-previous2inkin-krew-blog-hop-next2

 

 

 

  1. Jaimie Babarczy: https://wp.me/p79UhD-2SZ
  2. Karen Finkle: https://karenscardkorner.blogspot.com/2019/06/stampin-up-heartland-birthday-card-for.html
  3. Karen Ksenzakovic: https://wp.me/paaNf4-Gn
  4. Shirley Gentry: https://stampinwithshirleyg.com/?p=5794
  5. Connie Troyer: You are here!
  6. Mary Deatherage: https://wp.me/p5snyt-8nX
  7. Sue Prather: https://wp.me/p5yitZ-1hJ
  8. Akiko Sudano: https://stampininthemeadows.com/?p=593
  9. Amy Koenders: https://wp.me/p2SFwf-fPE

 

If you don’t have a Stampin’ Up demonstrator yet and want to order or receive a catalog, please feel free to contact me for help. If you want to order, use code DWFPUKPH and I’ll happily send my thanks and a free gift! Make it a great week!

Connie

“A Good Man” Stamp Set with Seaside Spray In-Color for Stamp with Amy K’s Tuesday Blog Hop

A masculine card for use during Father’s Day (or any day!) for Stamp with Amy K’s Tuesday blog hop.

img_9128

Hello again and welcome back to my blog—or thanks for stopping by if you’re a new visitor! The theme for Stamp with Amy K’s current Tuesday blog hop is “masculine,” so I decided to create two “Father’s Day” type of cards that can be used at any time for the guys in our lives. Since they are going to my local gift shop for sale, I needed to create something that didn’t explicitly say “Happy Father’s Day” (best for a longer shelf life!).

I’ve used all current or upcoming products that are available on June 4, when Stampin’ Up customers can order from the new catalog. I was able to preorder some things because of my demonstrator status. So I’m using stamps from the new cling set “A Good Man” and one of our brand-new In-Colors, Seaside Spray (only available for purchase June 4, 2019 through May/June of 2021).

Seaside Spray is a gorgeous color that reminds me of a smoky blue. It’s one of the shades in my valances, actually, so I have a feeling I’ll be using this color for years to come even after it retires. 🙂 And “A Good Man” is one of those casual, contemporary sets that have a sketched look to the images, with some slight distressing on the sentiments.

I began each A2 card with a Seaside Spray card base, taking an 8.5×11 piece of cardstock and cutting it in half. I wanted to use two of the colorable images in the stamp set, one on each card, and quickly figured out which rectangles my chosen images would fit inside in my new Stitched Rectangles die set.

I stamped each colorable image in Memento Tuxedo Black ink and die-cut the first rectangles. Then I colored them with some of our Alcohol Blends: Dark Mango Melody, Dark Old Olive, Dark Smoky Slate, Dark and Light Basic Black, Ivory, Bronze, Dark and Light Shaded Spruce, Dark and Light Balmy Blue, and Dark and Light Real Red. (I need to get a dark blue yet, so I had to color all pants in various shades of black and gray.)

Seaside Spray isn’t one of the colors I own in the Blends yet either, so I used Light Balmy Blue for the sky and border, hoping it would look all right. Turns out it does sometimes…but not if there’s a lot of concentration. I filled in the background of one of the images but left the other white. I wasn’t sure which way to go. Tell me which one you like best. 🙂

Next I die-cut other various-sized rectangles from the Come Sail Away and Perennial Essence Designer Series Paper packs and and staggered them with the images and sentiment block.

I also carefully edged around the border of one of the die-cut, colored images with my Balmy Blue Blend. I wanted to do something in the corners the way I would dye ink, but I didn’t trust myself enough to try it with the Blend. I’ve had to redo enough this evening. I’m actually pretty pleased with how the edging turned out. It was easy and looks clean and simple. I liked it so well that I did it on the second card too, with a Night of Navy Stampin’ Write Marker (but it was much easier to accomplish with the Blend, at least tonight!).

After I placed the sentiment block and glued the rectangles for the first card, I added three Heart Epoxy Droplets to two corners to finish the card.

And here is where I have to confess something. Two things, really. I lost a stamp before I finished my cards or this blog post. Specifically, I lost the main sentiment for the front of the cards. I have torn this room apart, searching through my trash can, cleaning off my desk and the cart next to me, checking my clothes…. It still hasn’t turned up. (Please tell me I’m not the only one this has happened to!) I can attest that the new cling stickers are really sticky, because I had the stamp rubber-side down in the case with the sticker facing up so I could quickly grab it and stamp it after I was done with the inside pieces. I’m certain it’s stuck to *something*. 🤦‍♀️ So... Sigh. I handwrote the same sentiment in a similar kind of font and lightly stuck it to the card—for this blog’s purposes only—where the real sentiment will be stamped in Night of Navy ink on Seaside Spray cardstock. When I find it. Humor me, please. (If I can’t find the stamp eventually, I may just have to repurchase this set because that pair of sentiments is essential!)

This card has now also convinced me that I need to get the Subtle 3D embossing folder. The background still needs something. I thought of stamping too late, after I adhered the rectangles. I’ll pretend I’m going for “clean and simple.”

The first card.
Another angle, showing the hearts a little better.

And now for my second confession. My roll of Night of Navy/Sahara Sand Baker’s Twine has gone AWOL as well. (I’m betting the cat did it. She’s been known to do so.) So I’m using most of the piece of twine that I snitched at OnStage for my Come Sail Away card I finished later at home. I also cut card #2’s heavy-striped piece of Night of Navy/Whisper White DSP the wrong size…and that was after I spilled ginger ale on four newly opened papers and cut out the wet sections. 🙄🤦‍♀️ Trust me, if I can make cards I’m proud of with all this chaos, anybody can!

So this is what I refigured for the second card, after some challenges (like the fact that I had to use the Color Lifter too, even before I cut the striped piece incorrectly). I used Linen Thread at the bottom of this one. I felt I needed to separate the Balmy Blue Blends background from the Seaside Spray cardstock because, for me, the color difference was too much to have them next to each other. My first thought was to have the striped paper cover the entire card front, but obviously that went awry. I decided that the mistake wasn’t so terrible as to have to redo that too (and I sort of hated to cover up all that beautiful new In-Color anyway), so I just went with it. I hate wasting paper. (My apologies again for the handwritten sentiment. It will look so much better with the real one….)

The gift shop card.

The insides of both cards are identical, and they went so much smoother than the rest. I was even watching a TV show while I stamped. (That does it—I should always watch TV while crafting. But not in the dim light, because I think that’s when I lost my stamp.)

So that’s it for me tonight. It’s time for bed. Thanks again for stopping by my blog! So sorry about all the mishaps. Some nights just go like that.

If you’re interested in receiving a catalog, I’d love to send you one. Just drop me an email with your info using my Contact Me form.

If you want to continue the hop to see what the rest of my fabulous team members made, click the Next button to see what our fearless leader, Amy Koenders, has made, and if you’d like to go backward instead, click the Previous button to visit Sue Prather’s blog.

  1. Karen Ksenzakovic – https://wp.me/paaNf4-Bn
  2. Terry Lynn Bright – https://wp.me/p8fxPh-80
  3. Jaimie Babarczy – https://wp.me/p79UhD-2Pa
  4. Mary Deatherage – https://wp.me/p5snyt-88U
  5. Karen Finkle – https://karenscardkorner.blogspot.com/2019/05/stampin-up-wood-textures-dsp-for-amys.html
  6. Akiko Sudano – https://stampininthemeadows.com/?p=462
  7. Shirley Gentry – https://stampinwithshirleyg.com/?p=5240
  8. Sue Prather – https://stampwithsueprather.com/?p=4744
  9. Connie Troyer – https://wp.me/p8xvI6-nm
  10. Amy Koenders – https://wp.me/p2SFwf-frW

A Masculine Card with the Come Sail Away Suite (2019-2010 Annual Catalog–Sailing Home stamps)

Let’s all say hooray that I can finally blog again! I started this masculine card while in Charlotte at OnStage with Stampin’ Up in mid-April but didn’t finish putting it together until the preordered corresponding dies arrived at my house after vacation and I had some time to do sit down with them. The Stampin’ Up team gave us precut pieces in a kit to use with supplies on the table, though we could change it any way we wanted to. I did end up varying my card a little from the picture they included with the kit.

This card features the Come Sail Away suite, which will be new in the 2019-2020 Annual Catalog (available to customers June 4). What I used from the suite is the Sailing Home Stamp Set, the Smooth Sailing Dies, some of the Come Sail Away DSP, the Sail Away Trinkets, and a bit of its Sahara Sand/Night of Navy Baker’s Twine. The suite itself also includes the Come Sail Away Memories and More Card Pack and the High Seas 3D Embossing Folder—and let me tell you, this suite is awesome. I will be making up some cards with the Come Sail Away Memories and More Card Pack soon as well (there are laser-cut specialty cards in the pack of 50 double-sided cards!).

New cling stamp set available June 4.
The stamps, dies, twine, trinkets, embossing folder, and Designer Series Paper. A must-have!
The cards in the Memories and More Card Pack…one of my all-time favorites! Look at those laser-cut designs!
These trinkets are flat enough to mail and lightweight!

So, for this A2 card, I glued some Come Sail Away DSP onto the card base first and then placed the smaller piece of DSP cockeyed at an angle for its position behind the focal piece. For that focal piece, I used Balmy Blue ink with an AquaPainter to create a light wash of blue sky in the background (technically I did that last, but it’s smarter to do it first).

I stamped the lighthouse onto the Whisper White focal piece with Night of Navy ink and then stamped the compass off to the right of it with Early Espresso ink the way the kit photo suggested. Then I stamped and fussy-cut another lighthouse on scrap Whisper White and placed it atop the first one with foam dots so it became 3D. (The kit also suggested we add a die-cut ship’s steering wheel here with the lighthouse/compass/sentiment area, but I moved my wheel to the inside of the card instead—and left plenty of room for an overdue message.)

I stamped three flying birds in Tuxedo Black Memento Ink in the sky and distressed the edges of the Whisper White piece with a distressing tool. Then I die-cut a piece of rope with some dark brown (Soft Suede?) cardstock to lay across the bottom under the lighthouse (it embosses while it cuts!), and I die-cut a sentiment spot out of Balmy Blue cardstock after that. The sentiment die has a wonderful dashed or stitched outside border that is pressed into the paper as it cuts the die-cut.

I then stamped the sentiment (“Let Hope Be Your Anchor Through the Storms of Life”) in Balmy Blue. Since this is a cling stamp set, it is much easier to line up visually, so the stamping went well the first time through, even if I probably should have used Night of Navy ink instead. 😉

To finish off the card, I tied a bit of the Baker’s Twine through one of the anchor trinkets (there are both anchor and ship’s wheel trinkets) and glued the ends of the twine up under the sentiment spot, as if it was dangling there or laying near the lighthouse.

Here are some snapshots I took at OnStage including the display boards of the Come Sail Away suite. Our presenter in Charlotte was the incomparable Mary Deatherage, who happens to be one of my team members! She created the samples on the display boards for this suite as well. It was so much fun (and a bit awe-inspiring) to see her demonstrating the products right up there live in front of us, and she did an amazing job.

Suffice it to say I will be using these again soon! I think the “Set Sail in the Direction of Your Dreams” sentiment is going to be great for masculine graduation cards this season. They hit a home run with this bundle.

Although the new catalog isn’t available to order from until June 4, I’m happy to send one your way once I get them. If you’d like a catalog, just email me! There are also still a lot of great things carrying over and retiring from the two current catalogs. If you need a demonstrator, you can use host code RRCMHZ4E when you shop with me (catch the direct store link in my sidebar at the right or click http://www.stampinup.com/ECWeb/default.aspx?dbwsdemoid=2202334!). I’m happy to answer any questions you may have. Thanks for stopping by! Let me know what you think of this product suite!

Red Foxes in Winter Special Birthday Card

Back in the summer, I was asked to make a special birthday card for a special friend’s son who has a fondness for foxes—all shades and types. She gave me free creative rein and said she didn’t care what I did with the idea, but that he might like a red one. I considered several different fox stamps and stickers but finally chose a particular stamp that shows foxes in a wintry scene since his birthday was in February (“300-16 Red Foxes and Birches,” Stampa Rosa).

I’ve never really thought much about foxes in my life, other than thinking they’re beautiful animals in general, so I had no idea how to shade one. Coloring is something I’m still not comfortable with, because I feel like the concept of shading is one I haven’t begun to learn. Luckily for me, the wooden stamp I was using had a colored picture on the front that I just had to attempt to recreate! 🙂

First I had to choose the right paper, though, which evidently was not the bumpy watercolor paper I tried to stamp on first (twice). I knew that, but I was thinking of using my water-filled Aqua Painter on it and felt the paper would handle it. I liked the textured look of the watercolor paper too, but the image was too detailed to stamp cleanly with the bumps in the paper. Then I remembered Stampin’ Up’s Shimmery White cardstock, a must-have in my collection. It’s not any thicker than the rest of their cardstock (other than the aptly named “Thick” cardstock in the line), but it’s smooth and somehow holds up great with watercoloring–and it’s sparkly to boot (hence the “Shimmery” part of the name). Bonus for me was that the paper helped my snow scene sparkle.

Once I had the paper figured out and the stamp stamped correctly, I took my watercolor pencils and tried to emulate what I saw on the wooden stamp block. I had to mix a few shades to get that red fox coat color with the darker spots. After using the watercolor pencils, I took my Aqua Painter to it as planned and went back and forth between the two tools a few times until it felt right (because I have no idea what I’m doing, really. I’m assuming I’ll get better as I learn by trial and error).

After I was satisfied with the colors and the paper had basically dried, I went over the snow and snow-covered branches with my Clear Wink of Stella brush marker to bring back the sparkle to the snow that I’d ended up coloring over with the white pencil. (The sparkle shows through the color a little, but I really wanted the snow to glimmer.) Then I set aside the piece to dry while I figured out the rest of the card.

My favorite crafty thing to use these days are metal cutting dies. They’re simple, quick to use, and make things prettier or more elegant than I could come up with on my own. (They’re also faster for me than my Cricut.) I hang most of them on my wall and the back of my door on large magnetic sheets or vent covers so that I can easily walk over and try different sizes and shapes with whatever I’m wanting to cut out, rather than taking time to flip through a box and take die sets out of envelopes.

For this card, I looked at a bunch of large shapes, trying to decide whether to cut it into a type of oval or a fancy square or a rectangle. I ended up using one of my new sets from Spellbinders that hadn’t yet made it to my wall (Art Nouveau Designer Series “Water Lilies Decorative Element”), because it fit the image perfectly without making me cut it down too much (after all that hard work in coloring, I hated to do that!).

I debated whether to use a SU Cajun Craze cardstock base or a white base and which color to set off where. I ended up cutting several different colors of cardstock with the frame die to test them and see what worked. The card finally fell together color-wise when I brought in the darker wood-grain paper (SU “Country Lane” DSP) as a background to echo the dark shading in the picture. The dark complements the darker orangish-brown Cajun Craze well enough while keeping the same tones. With the white base, there was too much contrast and the frame jumped out at me rather than letting me focus on the colored image. So I ended up using a Cajun Craze base but covering the entire front with the wood grain and using a Cajun Craze frame on top and beneath the white colored image. (It’s a solid piece that gives a mat to whatever is inserted into the sides.)

This particular frame die acts like a gift card holder where the center flowers are, gently opening up and holding whatever is placed in the solid middle. That took some thinking, trying to measure and cut down the colored image so that it fit into that space under the flowers just right. The opening/middle rectangle is much larger than a gift card, but it’s the same idea…though this is only one way to use it.

The one thing I forgot to do to the test pieces was to make sure they were embossed well also. (One reason I love Spellbinders is because they have awesome sections of the dies that are intended to be embossed to give it a little something extra. I miss that feature when I use other brands.) So the embossing could have been done a little better in parts here, because I forgot to take that step to make it pop. I didn’t remember it until I’d mailed the card and noticed it in the pictures. In the photos above, perhaps you can see that the center flower pieces are more deeply etched than the corners above and below them. Next time…I shall remember next time. 🙂

My customer wasn’t picky about what to say on the inside either, other than asking me to write his name and theirs in it and mail it straight to him. So I had to dream up something based on other things she had said to me. After adding fox washi tape to the bottom of a white piece and then matting the paper onto a different kind of wood-grain patterned paper from a 6×6 pad (can’t remember which one now), I used three different stamp sets and another die to make the sentiment section. “A little expression of love” is from SU’s “Painter’s Palette,” “just for you” is from SU’s “From the Herd,” and “Happy birthday” is from MFT’s “LJD For the Boys” (part of the “Happy Birthday, Handsome” stamp). The die is among those in a retired nested set from SU called “Deco Labels.”

I used my stamping platform and its grid to line up the sentiments on the die-cut and stamp out a couple of test pieces in Cajun Craze ink to make sure they sat where I wanted them. (I had tried stamping right on the matted liner paper but I accidentally got ink where I shouldn’t have, so at that point I just had to cover it up because it was already adhered.)

After the sentiment box was stamped, I edged around the die-cut with my Cajun Craze Stampin’ Write Marker so it would stand out against the white paper. And, once again too late, I saw that the double fox spot on the washi piece. I didn’t create that intentionally; it’s just how it came off the roll. I wish I had seen it sooner; it bothers the part of me that prefers symmetry. 🙂 I also added two gold glitter hearts from MME (“Niche/On Trend Foam Stickers”) in the white space of the sentiment box.

I like how this one turned out even though it tested me at times and there are a couple of things I wish I could do differently. It’s always easier to make a similar card a second time. Maybe I’ll try to do one for the local gift shop. After all, I’m not completely convinced that winter is over with where I live.

Some of the Stampin’ Up items I used on this card are retired, but you can purchase the ink, cardstocks, and other current items through my online store if you want to try them (please use code 6WPHJ2MC at checkout unless your order is over $150). The thumbnails below will take you right there…and this is an awesome time to get them since Sale-a-bration is still going through the end of March. For every $50+ order before tax and shipping, you get to pick an item out of a select group of almost two dozen items and Stampin’ Up will send it to you for free with your order! Plus you’ll also get a free gift from me. 🙂 Please contact me if you have questions.

Thanks for visiting my blog! I truly appreciate my readers. ❤️ Have a lovely day! #neverstopmaking #mftstamps

Product List

 

 

Celebrate Spring with New Babies! (“Perfectly Paired” for Amy’s Inkin’ Krew Blog Hop)

Welcome to another blog post for Stamp with Amy K’s Inkin’ Krew Blog Hop! We have a very talented lineup for you this week. Thanks for stopping by to see what I created. 🙂

Our theme this month is “Celebrate Spring,” in whatever way we want to interpret that. Because I’m also making cards for my local gift shop, I chose to go with the “new birth/baby” idea. I couldn’t wait to get my hands on Stampin’ Up’s “Perfectly Paired” cling stamp set when it came out—it’s all about babies and features a Noah’s Ark image, one of my favorite themes for little ones. This stamp set (so far as we know) is only available for a couple more months since it’s in the current Occasions catalog.

Since I knew this would be a nice card and likely given with a gift, I started off by grabbing a lovely, thick envelope from my stash and then made the card base a 5×7 size to match it, using SU’s Shimmery White cardstock. I chose Shimmery White because I wanted to color the image.

Well, as usual, although I was aiming for simple, I evidently have to complicate things. And I made plenty of mistakes to cover up. My “MO,” I’m starting to think.

It occurred to me that there were waves under the ark in the stamp but I thought it might look a bit “adrift” all by itself on a flat card base. So I got some of my new Ice Blue Matt Mirror Luxury Cardstock (Crafter’s Companion) and cut it down, leaving about a 3/8″ border of white on the base for the “shimmery” part of the “Shimmery White” to show. Then I embossed some waves onto the mirror card with my Cuttlebug (“Musical Flourish” embossing folder).

My piece of mirror card was slightly longer than the embossing folder, so I embossed both ends and then attempted to hide the faint line the edge of the folder left with some retired 1/2″ SU Pacific Point ribbon. I wrapped the ribbon around the edges to give it a neater, more finished look. I believe I used my 1/4″ Scor-Tape down the middle of the back of the ribbon.

I didn’t actually cover the line left by embossing because the ribbon wasn’t wide enough, but hopefully I distracted anyone from looking too closely. I tried to keep the embossed design from overlapping when I ran it through the Cuttlebug, and the embossed line really isn’t that bad, but it’s mirror card so everything shows…. 🤷‍♀️ Whether I needed the ribbon or not, it was an attempt to make the card look better, and I built the rest of the design from there.

After fiddling with the layout, I decided to also mat the mirror card with Pacific Point cardstock to bring more of the ribbon color in for balance. I left 1/8″ of the mat showing, glued the mirror card to the mat, and then glued the combo onto the card base. I used my ATG tape gun for these. Then I set aside the card so I could concentrate on the image. And here’s where things got interesting.

I wasn’t sure whether to use my Stampin’ Blends alcohol markers to color it or my usual: watercolor pencils with either an Aqua Painter or a Blender Pen. I figured I’d do one of each type of coloring and leave the extra in my “card parts” bin for faster cardmaking later. Because those mediums require different inks to control the color, I stamped the ark image from “Perfectly Paired” once in Memento Tuxedo Black (for the alcohol markers) and once in SU’s Archival Basic Black (for the watercoloring). I labeled the backs with a pencil so I’d know which went with what…and then promptly started coloring the wrong image with the wrong medium because I was “doing,” not “thinking.” 🙄🤦‍♀️

Surprisingly, the Archival Basic Black didn’t smear too badly with the alcohol Blends, but I had been careful about not coloring over the lines, just because I was carefully coloring. It wasn’t until I smeared the lions’ whiskers a little that I even realized I’d switched the pieces. (Live and learn?) But smearing lines is why we are supposed to use Memento ink with alcohol markers. Lesson learned.

And then I discovered that I don’t yet have enough Blends to finish coloring this particular image. 🤦‍♀️🤪 I’ve been building my collection a little at a time, and although the Smoky Slate and Basic Black Combos have each made it to my purchasing list at least once, I ended up dropping them for things I wanted more. (Sacrifices!) Therefore, I have to stop coloring the image until I can get those and finish. For the record, though, this was as far as I got, and I really like this medium. (If you look closely, you can spot my whiskers accident.)

So I had to put all that away and regroup. I couldn’t remember whether Memento would smear if I got it wet (since it is a water-based ink), but I just wanted to get something going that I could use. I mentally crossed my fingers and dove in. I could always stamp another one if I had to.

Fortunately, it worked just fine—no smearing that I can tell. My coloring isn’t perfect, but at least the lines didn’t move. I went with the Aqua Painter to smooth out the watercolor pencil lines too…though in hindsight, I should have tried the Blender Pen, for better control in small places. Or just chucked it all and gone straight for my stash of Stampin’ Write markers. (I hope you’re learning from my mistakes! This veteran scrapbooker is still learning so much about cards!)

I will admit to a little cheating as well. I knew I had a Pacific Point chalk in my arsenal. As my retired SU watercolor pencils are unlabeled, I went for the chalk to color the water (with my Aqua Painter) so I could be all matchy-matchy instead of throwing off the shades by introducing some other blue. 😊 Also, I lightly colored the background a sky blue so that it wasn’t stark white paper. If I was coloring waves, I had to color sky too, right? But it’s hard to see in the picture.

So this is where I ended up with it (including doctoring the zebras with white Smooch paint and a Memento pen in desperation after watercoloring and black got the better of me). Coloring was the longest part and why it may be better to use some sort of marker next time. 🤷‍♀️ Another lesson learned!

The main focal image, colored.

Once the image was done and dried, I covered a good portion of the back of it with my 1/2″ Terrifically Tacky Tape (TTT), which is just like SU’s Sticky Strip. I did this to combat the curvature of the paper that happens once water goes onto it. Then I peeled off the tape backing and centered it in the section above the ribbon on the card front.

I had found some black, glittered chipboard faux photo corners when I was debating about the layout, so I glued those overtop the corners of the image with my Art Glitter liquid adhesive. And then I pulled a metal bar sentiment (“celebrating your arrival”) out of the heap of baby ephemera in front of me on my desk, and I adhered it to the top of the ribbon with more 1/4″ Scor-Tape. The front was done. Finally. And I’m even happy with it. 😂 I especially love how the foil look of the matt mirror cardstock shines and changes depth and color in the light. I so love using specialty materials to make cards pop.

(Oops! You can see that faint embossed line in this pic! Well, it’s not that noticeable in person. 😊)

For the inside of the card, I used the “Two by two we welcome you” sentiment from “Perfectly Paired,” stamping it with VersaMark on Shimmery White cardstock before heat embossing it with “Blue Tinsel” embossing powder from my stash. (No idea who made that; I’ve had it for years.) It was the closest embossing powder I could find to the Pacific Point color I’d been using, and it does actually look glittery, like tinsel, and has some texture to it once embossed. I then backed the white sentiment piece with a die-cut Pacific Point cardstock tag from a Spellbinders die (“Fancy Tags Two,” I believe. #neverstopmaking). I think it turned out quite lovely.

To finish off the card, I took a strip of dotted blue (SU Pool Party) cardstock from the retired Tutti-Frutti Cards and Envelopes pack and attached it to the bottom of the inside. I also cut off a small strip of matt mirror cardstock to top it. And then I found two goofy pink flamingo stickers in my stash from Sandylion and stuck them to the bottom right corner just for fun, to carry through the theme. I was looking for my smaller Noah’s Ark stamp for the corner, but I have to keep looking. 🤔🤷‍♀️

I haven’t decorated the envelope yet, but I’m thinking of stamping a row of various animals across the horizontal bottom (under the address section) as a sneak peek to the theme.

Below the list of hop participants are the current products I used in my card (or similar ones) that you can purchase through my online Stampin’ Up store if you wish to own any. (Please use host code 6WPHJ2MC when you check out.) Don’t forget that we have until March 31 to get free gifts from Stampin’ Up through Sale-a-Bration with orders of $50 or more before tax and shipping! There are some awesome reward products available! I also give free gifts to those who order through me. 😉

Thanks again for visiting today. I hope my mistakes keep you from making your own! Feel free to post questions or comments. 🙂

To continue with our hop and visit Jaimie Babarczy’s blog offering, click Next or her name in the list below. To view what Karen Ksenzakovic created, click Previous or her name. Thanks for hopping along with us!

 

 

 

 

  1. Karen Ksenzakovic
  2. Connie TroyerYou are here!
  3. Jaimie Babarczy
  4. Sue Prather
  5. Julie Johnston
  6. Mary Deatherage
  7. Karen Finkle
  8. Shirley Gentry
  9. Amy Koenders

Product List