A Polar Bear Christmas

Playing along with a Stamps, Ink, Paper Challenge (128) with a Snowy Polar Bear Christmas card and matching thank-you note.

Here’s another adorable card with matching thank-you note that I created for a custom card order needing to be mailed soon. I think it fits the Stamp Ink Paper 128 challenge, shown below:

http://stampinkpaper.com/wp-content/uploads/2017/12/SIP-Challenge-128-Let-it-Snow-NEW-800.jpg

So here are my matching cards.


I’ll tackle the main Christmas card first. The embossed snowy background was given to me by a crafty friend, and I flipped it over so that the debossed side was showing. I matted it with some current SU Emerald Envy plain cardstock on a Thick Whisper White card base. The paper-pieced polar bears and trees are 3D stickers from a “Holiday Time” series – I think they might be from Walmart. They’re actually pretty cool, using poms for the tails and the ends of scarves, and the tree is glittered. 

I was having trouble fitting all three on the A2 card base, so I thought if I had one peeking over a snowbank as if he were watching the scene, I could put them a little closer together. My “snowbank” is made out of two strips of shimmery translucent vellum paper, which I cut by tracing a Card Creator Spellbinders die and then cutting it out by hand (hubby was sleeping and I was trying to minimize the noise, plus I wasn’t exactly sure where I wanted the mounds to go, so I traced/cut it especially long and then positioned them where I wanted them). I popped up the vellum in parts for effect and to fit the back polar bear in without squishing him (trying to reduce that whole “translucent” thing). 

I had thought of using white handmade mulberry paper instead of vellum, but I didn’t feel like making a bunch of noise and rooting around in my “specialty paper” drawer since it was late and I was only supposed to be “fiddling” (i.e., going to bed soon) as opposed to outright intentionally creating. 

The “Happy Holidays” sentiment above the scene is from a 2016 Hampton Art stamp and die set (SC0718). It bugs me a little that the font sizes of the two words is not the same, but as the set is either photopolymer or acrylic (read: see-through), it was easier to line up than others. I inked the stamps with Stampin’ Up’s Emerald Envy ink overtop a strip of polka-dotted paper from American Crafts/Dear Lizzy “5th and Frolic.”


I kept the inside of the main card simple with a “Warm Wishes This Holiday Season” sentiment from Close to My Heart’s “Scandinavian Wishes Stamp of the Month,” (SU Emerald Envy ink), punched it out with my retired SU Scallop Oval punch, and matted it with my SU Decorative Label punch in Emerald Envy cardstock. 

The thank-you note, on the other hand, is simply a SU Whisper White notecard size (3.5×4 7/8) with a background of gold snowflakes on vellum from SU’s “Winter Wonderland” Designer Vellum Stack. I laid an Emerald Envy cardstock piece embossed with  the “Thanks Words” Cuttlebug folder (371134) on top (putting the glue for the vellum underneath where the cardstock layer would hide the adhesive) and then cut another “snowbank” out of the gold snowflakes before finally adding the last sticker in the Holiday Time set. (Yay, another thing used up in my stash! I really am trying, hubby dear.)

These cards were ones that were simple, thought-provoking, and yet fun to create – my favorite kind. It was my first time trying to create “snowbanks” even though I’ve seen them used with regularity this season. And I’m fairly pleased with how it all turned out. Unfortunately, they’re another two cards I can’t duplicate unless I find another pack of stickers (thus then adding to my stash). πŸ™‚

Hope you’ve enjoyed this offering! Thanks for stopping in. 

House Mouse “Musical Mice” Birthday Card

A musical birthday card for a musician celebrating a milestone year.

I took a break from Christmas cards to do up a few birthday cards that I needed to deliver or mail. One of them went to my aunt, who is a supremely talented pianist. I had thought of using this focal image for her ever since I first got my hands on this cute House Mouse stamp. 

I grabbed a premade base that was of a larger size, since the stamp itself is basically the size of an A2 card front. No room for the music note paper I wanted to use behind it. But this larger card size worked well for the idea. 


First I put down a layer of silver foil cardstock (cutting out the inner portion with snowflake and winter-themed word dies that I can use on other projects). The music paper I placed on top is from Echo Park’s “Be Mine” line. I then stamped, colored, and cut the House Mouse image so I would know what size to cut the Silver Glimmer Paper (glittered cardstock) from Stampin’ Up, which I placed behind the image as a mat. 


I think I might need to work on my coloring skills, or at the very least shading, but I’m pleased enough with my creation. πŸ™‚ I used three sets of watercolor pencils, an AquaPainter, and Ranger’s Jet Black Archival Ink to stamp and color the image. I topped it off with some gold Smooch Paint for the knobs on the violin and the lettering of “Mauschen,” the name of the piano. I had looked up the stamp online and found the colored image from House Mouse, so I tried to imitate those color choices. (Each of the mice are named and has their own coloring specifications.) I think next time I might try a black piano, however. 

I had the most trouble finding and placing a sentiment on the card due to limitations in space and supplies. I had to revise my initial idea several times, and the more I hurried to finish it (since I needed to be leaving the house), the worse it got. Isn’t that always the way of it? Eventually something worked, although I realized an hour later that I’d forgotten to include the milestone number she was turning, as I’d intended. But maybe she doesn’t need that advertised. πŸ˜‰ 

So, the tag is from the American Crafts “Everyday” line, the “Just a Note” sentiment is from Rubber Cottage, and I couldn’t read my handwriting on the back of the tiny music notes I added to the tag, so I can’t say who made that. The black lace ribbon is from Stampin’ Up. I stamped the sentiment with Jet Black Staz-On ink because the tag was chipboard with a shiny top and water-based dye inks just wipe right off of those. I used my heat gun to speed up the drying process as well.


The inside of the card finished the thought begun on the front (“Just a Note”) with “Wishing You Happy Birthday.” Again not quite what I’d intended to say, but time really was of the essence, so I made do with the first couple things I found rather than creating a custom sentiment. And I’m the only one who overthinks these things, so it probably doesn’t matter. πŸ™‚ The stamp sets I used for the inside are from Stampin’ Up (“Wrapped in Warmth”) and Close to My Heart (“Gracious Greetings”). I also embossed piano keys for the bottom border. The embossing folder I used is 5×7 and entitled “Keyboard,” from Cuttlebug. 

Coloring always takes a bit of time, and I really do need to perfect some shading skills (here’s wishing I could go back to art class), but I’m generally pleased with the images once I’m done. I always enjoy seeing how the lines swirl and blend together when I’m watercoloring. Perhaps I’m really a Renoir at heart. πŸ˜‰ 

That’s all for this birthday card. The others I created were simpler, of course. But details are my specialty. πŸ™‚ Thanks for reading!

Season’s Greetings with Snow


Hello, all! It’s November now, but all I’ve been hearing for hours is rain. Still, there are Christmas cards to create. I have a couple of custom orders for them along with my own this year. This card, I’ll use for one of the orders. 

I feel like I made it out of practically nothing. Or, rather, it cost me practically nothing to do it, by the time I divide out all the pieces in the packs, etc. The card base from Die Cuts with a View was bought several years ago on clearance, and with this card I finally used up the pack (sad face here, as I loved them and have been hoarding them). It has a scalloped edge on the front of the card with two lines of glitter above the scallops and dots of glitter inside each curve. 

I have mentioned that crafters are a generous bunch. Both the embossed snowflake background and the die-cut snowman came free of charge from such generous crafters in one or two of my Facebook groups. (And the good news is that I still have a few more embossed backgrounds, though I am sadly out of snowmen.) I may have traded some of my own supplies for them, or perhaps they came as Happy Mail or a RAK (Random Act of Kindness). Either way, I’m happy to make use of them. Though I have no idea which companies to thank. The snowman looked as though he was exceedingly happy and welcoming something, so I figured he would like a snowfall. πŸ™‚

I sized up the snowflake background to the card base and realized I’d have to cut it down a bit to keep it above the glitter lines. I backed the embossed piece with some textured purple/mauve Gauze Paper from DCWV. The snowman got a little color enhancement with some Stampin’ Up inks and a Blender Pen. I tried to give him a sort of muted vintage look to coordinate with the other colors. (And I wasn’t sure if he was stamped with archival ink that doesn’t bleed when touched with waterlike substances, so I had to color him carefully just in case it was a dye-based ink.)


I had a few sentiments that would fit the upper corner, but I had trouble deciding on one until my tiredness and the hour made the decision for me. (“Slap it down and move on,” my friend A likes to tell me. I actually listened this time.) I found this “Season’s Greetings” in a pack of rub-ons from American Crafts, so I put it on a scrap of vellum hanging out on my desk, punched it out with Stampin’ Up’s retired Word Window punch, ran it through my Xyron Sticker Maker, and then needed a way to make it show up, since vellum is see-through. Enter a remnant of gauze paper, which I’d cut out of the center of the mat for the embossed snowflake background. (Why waste perfectly good material and hide it where no one will ever see? Craft supplies aren’t cheap!) I used a Spellbinders Die to cut the simple border, which fit the vellum rub-on sentiment perfectly. And this way we got to see a little more texture of that cool paper, since the mat behind the snowflakes is small by necessity. 

To echo the glitter that came on the card base, once I knew how much room I had to play with at the sides around the front piece, I stamped a border (bought from Oriental Trading) in VersaMark, poured on some retired Iridescent Ice glitter embossing powder from Stampin’ Up, and heat set it, one on each side. 

I kept the inside of the card simple with a “Let It Snow” stamp from SU’s “Snow Place” stamp set and a couple of snowflakes from SU’s retired “Letterpress Winter” set. I used Pale Plum ink (also SU, retired) and more of the retired Iridescent Ice glittered embossing powder.

Fairly simple card overall, though some of the pieces took a bit of fiddling. I enjoyed this one and may try to make more of them with different snowmen and sentiments. Thanks for stopping by and reading!

Personalized Wedding Card for Carolyn and Matthew

Throwback to a custom wedding card made last year for a couple I’ve never met.

In late 2015 I started accepting orders for custom-made cards. This fact still kind of boggles my mind. I never figured I’d be a cardmaker at all. I’m a scrapbooker–since the mid-nineties. Cards were confusing. Such a small canvas on which to put so much stuff! Give me a 12×12 page any day, thank you. But somehow with the purchase of my friend’s used Cricut, cards suddenly made sense, like that proverbial light bulb over the head. Someday maybe I’ll show those first three cards I made as I attempted to figure out the chirping machine.

So fast-forward a couple of years and suddenly I’m at the point of taking custom card orders…? Um, okay. If you say so. Indeed, it seems that’s what I mostly do now. Instead of creating cards for fun, for friends, for a local church group, for Hospice, etc., like I imagined I might do, family and friends and a particular lady in North Carolina have kept me very busy making cards for them ever since August 2015. And I’m grateful. (Though still boggling.) Here is one of the examples I made for a relative, so she could give it to a couple with a wedding gift. It is a twist on a version I made for my NC lady the year before that (why recreate the wheel if you don’t have to?), but in this version, I personalized it with the recipient couple’s names.

I used a premade, glittered card base from DCWV (5.5×5.5 size), added some light blue/grey patterned paper on top of it as a mat, and then ran some dark blue Recollections paper through my Fiskars handheld (hand-cranked) paper crimper tool. Their wedding color was dark blue, and I thought it would pair well with the Soft Sky color I’d used in the earlier NC version, which was still in my head.

On top of the now-corrugated dark blue paper, I placed a die-cut I’d made from a local friend’s Bloomin’ Heart Thinlits Dies from Stampin’ Up (she and I share supplies so we don’t have to buy as much individually and then have an excuse to get together to craft!). I used Stampin’ Up’s Silver Glimmer Paper for the heart – and found out the hard way (i.e., remembered) that it is best to cut on the back side of that glittered paper rather than trying to get the die to cut through the glitter on the front. (Let’s just say “Lesson learned”!)

2016-08-25 16.19.30

I decided I didn’t like the look of it by itself on the corrugated paper, not to mention that it is a delicate thing and would be hard to glue on top of the corrugation, so I glued the heart die-cut to another piece of the dark blue Recollections paper (that I did not run through the crimper). I then stamped out the little matching flowers of the corresponding Bloomin’ Love photopolymer stamp set in Soft Sky ink, die-cut them with the matching thinlit, and glued them on top in the appropriate places. I actually found it difficult to die-cut those without one edge or the other slipping and not staying centered where I put it. I have a number of rejects I didn’t deem “good enough” for the card. Must need more practice.

Before I glued the heart die-cut down, I laid it out to see where I wanted it, marked it, removed it, and then wrapped some Soft Sky Seam Binding ribbon twice around the corrugated paper and tried to tie a bow off to where the side of the heart would be. This step was trickier than I thought it would be, but I do like the effect. And I used up some of my seam binding ribbon, which pleased me immensely. I think it’s pretty as a whole, but I struggle with using it because it is so delicate. I feel like using the word “fragile,” actually. It catches on things easily, gets holes easily, and is almost see-through. I feel like glue or strip tape can be seen underneath it as well, so I have a hard time finding ways to use it that aren’t simply bows. So this worked. (And after I use up my seam binding stash, I will never buy any again.) I think I actually made the bow separately from the ribbon wrap because I couldn’t get it to lay right. I believe I attached the bow with Zots after gluing down the heart.

Then came the fiddly stuff. I stamped the tag that says “Always” from the retired SU Too Terrific Tags set in Soft Sky, cut it out (I don’t own the matching punch), and set it aside. Next I got out my retired Word Window punch and took it to some white cardstock. I then used some very retired SU Brilliant Blue eyelets from way back when, with my Crop-a-Dile at the tops of the “Always” tag and oval windows. I hand-wrote the couple’s names (more than once) and strung the three tags from the top ribbon with some SU Silver Baker’s Twine. I actually double-strung the “Always” tag to keep it the direction I wanted. And then because it was still not cooperating, I stuck a pop-up dot to the back of it and told it to stay put. The names still dangle sweetly as I imagined.

 

2016-08-25 16.20.36

The inside of the card was simpler. “The best is yet to come” sentiment came from my retired SU “Best Thoughts” Hostess stamp set, which I stamped on white cardstock in SU Night of Navy ink and punched out with my retired SU Decorative Label punch. I edged around the punch with my matching Night of Navy marker to highlight the edges since it was white on white. Then I stamped the “May your love” sentiment from the current SU Floral Phrases stamp set. (Yes, I do have some current items! πŸ™‚ )

All in all, I was pleased with the way this “version 2” card came out. Just for fun, here’s “version 1” that went to NC, in Soft Sky, kraft, white, and Crumb Cake. Version 2 also uses some distressed, stamped-on canvas.

2016-05-14 15.22.02

2016-05-14 15.23.41

Thanks for stopping by! Hope I’ve given some inspiration for your own wedding cards. πŸ™‚