A Simple Hello Card Using the Sweet Soiree Memories and More Card Pack

View on Instagram https://ift.tt/2xsyLs0
I grabbed a 4×6 printed piece from my Sweet Soiree Memories and More Card Pack from Stampin’ Up and adhered it to an Old Olive card base for this clean-and-simple hello card for Stacy. The peach ribbon is from Recollections but matched perfectly, and I also colored in the “Hello” and the centers of the flowers with a Clear Wink of Stella glitter brush pen. Quick and easy card.
#thelittlewhatnotshop #forstacy #hellocard #glimmers #flowers #sweetsoireememoriesandmore #a6 #customcardorders

Hello Recycling (of Cards)

Recycled card bits made new.

View on Instagram https://ift.tt/2sgDiZl
Sometimes things are just too pretty or useful to throw away. (Yes, I have a Depression-era mind-set.) Here I used part of a printed card that had made its way to me into a little hello card, complete with a new tag, wood and resin pieces, two types of patterned paper (one being embossed and glittered), Stampin’ Up Lucky Limeade ribbon, and translucent, glow-in-the-dark Nuvo Drops.
#thelittlewhatnotshop #forstacy #hellocard #etsypreneur #recycling

An Update on My Scarlett-Stitch

Every now and then I’m able to travel and take my Gone with the Wind cross-stitch with me. Here’s an updated picture of my progress.

View on Instagram https://ift.tt/2H7BY1k
Working on my Scarlett-stitch tonight, which I usually only do when I travel. Added some definition to her skirt edges on the right, filled in some holes, extended the ruffles, and figured out where I goofed last year, so I’m pleased with my progress. Most complicated pattern I’ve ever worked; she takes awhile to wrangle. I’m almost ready to flip the pattern over! (It’s about time.) I mean, Yay!

One Embossing Folder, Three Looks (Including SU Hanging Garden)

View on Instagram https://ift.tt/2GJF3Yv
Three different looks to using the same Darice embossing folder and SU Orchid Opulence cardstock. Two of the cards have embossing, and my favorite has debossing. All were glittered with Wink of Stella Clear, white, and/or gold glitter pens. All ribbon and twine is Stampin’ Up too. Sentiments are Sticko stickers, a Stampin’ Up stamp (from “Hanging Garden”), or gold Dazzles. The card with the lace has a set-on, popped-up front.
#thelittlewhatnotshop #forstacy #fordixie #darice #embossingfolders #stampinup #winkofstella #orchidopulence #etsysellerofinstagram #bakerstwine #laceribbon #coloringwithmarkers #embossing #debossing #flowers #dazzles #hanginggarden #sticko #customorders

Lessons in Stampin’ Up’s Embossing Paste

Well, my first foray into using Stampin’ Up’s Embossing Paste was certainly interesting. It’s been sitting on my desk patiently waiting for me to get to it. I finally got the paint palette and palette knives, and I already had ink refills to tint it with, should the mood strike. This won’t be too hard, right? I thought. Hmm.

Tonight the mood struck, when I was permitting myself a little dabble time before attempting to go to bed at a reasonable hour (since I’m on book deadline again). I had a salt-and-pepper love-themed notecard I wanted to add some hearts to as a border, and I thought the thick embossing paste would show up better rather than ink of the same color on a stamp I was waffling on.

Well. Apparently I have to figure out how not to let it bleed underneath the stencil. That seems to be my main problem. I had washi-taped down the edges of the first stencil (and card), which was created from an edge punch, and even kept my hands on all of it as secondary security, but still I erred. The heart borders weren’t terrible, though I don’t like the smudges at the bottom. I think I went over them three times. And once the paper is smudged with the color, it’s definitely hard to remove it.

I forgot to mention that I had put a little bit (probably too much) with my palette knife into my paint palette and added a drop – and then two drops – of Sweet Sugarplum ink refill (SU, current product, In-Color). I’m going to guess that one drop is enough. I was trying to match the color of the SU heart enamel shapes because I already had one on the card. Two drops definitely made it darker. So then I thought maybe I should add more paste to spread out the color more and make it the lighter shade I was going for. That meant there was a whole lot of embossing paste in my palette tray, more than six hearts would require. And mixing all that with my metal paint palette was difficult and sounded like scratches on a chalkboard. Perhaps a foam board or toothpick next time.

I started looking for other stencils I could use while I had all this goop I didn’t want to waste. I found a DCWV 6×6 stencil (EM-033-00012) that had both “LOVE” and “Be You” on it, and since this is the season for Valentine’s Day cards, I thought they’d go nicely with my current projects. I pulled two heart stencils too. Ambitious, apparently. 😉 And no, my paste didn’t stretch that far. 🙂

But in doing the “Be You” stencils on cardstock and then on DSP, I had a lot more problems with runs beneath the stencil. Granted, things were starting to dry while I searched for more stencils to use up the excess I’d made, but I thought I had time. Maybe I should have added a drop of water to keep it thin? No idea. Will have to research that.

I did find that once the paste was partially dry, I could take a tool and scrape off the excess around the letters…and the piece of black background/polka-dotted paper hid that a little better than the grey cardstock. Still not perfect, though. But manageable. At this point I’m thinking of taking my Cutterbee scissors and fussy-cutting around the gray cardstock example. Seems like it’s drying pretty quickly. I can’t scrape off anything around the hearts anymore. It would let me pat the “Be You” letters back into place by hand when I was trimming those with my Creative Memories sticker placement tool (use whatever you’ve got, right?).

Then I tried to wash off my tools. I think I should have done that immediately. I stood at the sink scraping off the stencil (which had been used twice then) with my fingernail, under running water and even soaking it in the sink. I couldn’t get it all off, and I bent a bit of my stencil as well.

So, I’m looking for tips on just what to do or not do with stencils and embossing paste. I’ve figured out that a little ink goes a long way and the paste dries fairly quickly, and obviously I need to clean the stencil earlier – but how do I get it to stop the bleeding? Thinner, repeated layers? I like height. 😦 I couldn’t see how to washi the close parts down either. If you have advice, I’m all eyes. Thanks in advance. It has to get better than this! It leaves such a cool 3D look when it’s actually all smooth.

I’ve wondered, too, whether the embossing paste (tinted or not) would work in silicone molds like SU’s retired pressed clay molds or the current Mod Podge molds sold in various locations. Any clue?

Pics attached so you can see my mess. 🙂 And thanks for the help! I feel like such a newbie. 🙂

Connie

A Polar Bear Christmas

Playing along with a Stamps, Ink, Paper Challenge (128) with a Snowy Polar Bear Christmas card and matching thank-you note.

Here’s another adorable card with matching thank-you note that I created for a custom card order needing to be mailed soon. I think it fits the Stamp Ink Paper 128 challenge, shown below:

http://stampinkpaper.com/wp-content/uploads/2017/12/SIP-Challenge-128-Let-it-Snow-NEW-800.jpg

So here are my matching cards.


I’ll tackle the main Christmas card first. The embossed snowy background was given to me by a crafty friend, and I flipped it over so that the debossed side was showing. I matted it with some current SU Emerald Envy plain cardstock on a Thick Whisper White card base. The paper-pieced polar bears and trees are 3D stickers from a “Holiday Time” series – I think they might be from Walmart. They’re actually pretty cool, using poms for the tails and the ends of scarves, and the tree is glittered. 

I was having trouble fitting all three on the A2 card base, so I thought if I had one peeking over a snowbank as if he were watching the scene, I could put them a little closer together. My “snowbank” is made out of two strips of shimmery translucent vellum paper, which I cut by tracing a Card Creator Spellbinders die and then cutting it out by hand (hubby was sleeping and I was trying to minimize the noise, plus I wasn’t exactly sure where I wanted the mounds to go, so I traced/cut it especially long and then positioned them where I wanted them). I popped up the vellum in parts for effect and to fit the back polar bear in without squishing him (trying to reduce that whole “translucent” thing). 

I had thought of using white handmade mulberry paper instead of vellum, but I didn’t feel like making a bunch of noise and rooting around in my “specialty paper” drawer since it was late and I was only supposed to be “fiddling” (i.e., going to bed soon) as opposed to outright intentionally creating. 

The “Happy Holidays” sentiment above the scene is from a 2016 Hampton Art stamp and die set (SC0718). It bugs me a little that the font sizes of the two words is not the same, but as the set is either photopolymer or acrylic (read: see-through), it was easier to line up than others. I inked the stamps with Stampin’ Up’s Emerald Envy ink overtop a strip of polka-dotted paper from American Crafts/Dear Lizzy “5th and Frolic.”


I kept the inside of the main card simple with a “Warm Wishes This Holiday Season” sentiment from Close to My Heart’s “Scandinavian Wishes Stamp of the Month,” (SU Emerald Envy ink), punched it out with my retired SU Scallop Oval punch, and matted it with my SU Decorative Label punch in Emerald Envy cardstock. 

The thank-you note, on the other hand, is simply a SU Whisper White notecard size (3.5×4 7/8) with a background of gold snowflakes on vellum from SU’s “Winter Wonderland” Designer Vellum Stack. I laid an Emerald Envy cardstock piece embossed with  the “Thanks Words” Cuttlebug folder (371134) on top (putting the glue for the vellum underneath where the cardstock layer would hide the adhesive) and then cut another “snowbank” out of the gold snowflakes before finally adding the last sticker in the Holiday Time set. (Yay, another thing used up in my stash! I really am trying, hubby dear.)

These cards were ones that were simple, thought-provoking, and yet fun to create – my favorite kind. It was my first time trying to create “snowbanks” even though I’ve seen them used with regularity this season. And I’m fairly pleased with how it all turned out. Unfortunately, they’re another two cards I can’t duplicate unless I find another pack of stickers (thus then adding to my stash). 🙂

Hope you’ve enjoyed this offering! Thanks for stopping in.